Flooring Installation · Inland Empire

Flooring Installation in Perris, CA

One of Riverside County's fastest-growing cities — from historic downtown bungalows to brand-new subdivisions around Lake Perris. Hardwood, LVP, laminate, carpet, and tile — installed by our own licensed crew. Licensed CSLB #1108879 · Serving Perris since 2008.

Residential & Commercial Construction · Inland Empire
18
Years Experience
Hundreds
Projects Completed
5★
Average Rating
#1108879
Licensed
A+
BBB Rated
0%
Financing Available
Flooring Installation · Perris

The right flooring transforms a house; the wrong installation ruins it. Construction Station is a full-service flooring contractor — not a big-box install crew. We remove your existing floors, diagnose and level the subfloor, install moisture barriers where they're needed, lay your chosen material to manufacturer spec, and finish with baseboards, thresholds, and transitions that look like they were always there.

We install hardwood and engineered wood, luxury vinyl plank (LVP), laminate, carpet, and porcelain or natural stone tile — and we'll tell you honestly which material belongs in which room, because we're the same crew that builds kitchens and bathrooms around those floors.

Working in Perris

Perris spans more housing eras than almost any city in Riverside County. Historic bungalows and mid-century homes surround the old downtown along D Street — home of the Southern California Railway Museum — while master-planned subdivisions like May Ranch, Villages of Avalon, and Green Valley have added thousands of newer homes on the city's edges. Lake Perris State Recreation Area, Skydive Perris, and the Perris Auto Speedway give the city its identity, and the Metrolink 91/Perris Valley Line puts downtown Riverside within a commuter's reach. For homeowners, that mix means remodeling needs run the full spectrum — from repiping a 1950s bungalow to upgrading a builder-grade 2018 tract home.

Perris summers regularly push past 100°F, and hard-surface flooring is the practical answer — tile and LVP stay cooler underfoot, handle swamp-cooler-to-AC humidity swings, and shrug off the dust that comes with a fast-growing city still surrounded by open land. Whole-home LVP is our most requested Perris project, replacing tired carpet and mismatched tile in one pass. In older homes we check subfloors carefully; decades of settling near downtown often call for leveling that makes the new floor look — and last — dramatically better.

Perris is about 40 minutes southwest of our Yucaipa headquarters via the 60 and I-215, well inside our core Inland Empire service area — we're in the Perris Valley regularly.

What We Build

Perris flooring installation, done right.

Luxury Vinyl Plank (LVP)
100% waterproof planks from COREtec, Shaw, Pergo, and Karndean — the region's most popular floor.
Hardwood & Engineered Wood
Solid and engineered hardwood in oak, hickory, maple, and walnut, plus sand-and-finish restoration.
Laminate
AC4/AC5-rated laminate with realistic embossed textures for high-traffic living areas.
Tile & Stone
Large-format porcelain up to 24×48", ceramic, and natural stone with precision leveling systems.
Carpet
Stain-resistant nylon and polyester carpet, power-stretched over quality pad — no wrinkles, no callbacks.
Subfloor Prep
Old-floor removal, leveling, and moisture barriers — the unglamorous work that makes floors last.
Perris FAQ

Perris flooring installation questions, answered.

How much does flooring installation cost in Perris?
Installed pricing in Perris typically runs $6–$9 per sq ft for quality LVP or laminate, $9–$15 for engineered hardwood, and $10–$18 for large-format porcelain tile, including materials, subfloor prep, and trim. Whole-home projects get better per-foot pricing than single rooms. We recommend budgeting an extra 10% for potential subfloor repairs — often it isn't needed, but planning for it means no surprises.
How long does flooring installation take in Perris?
Most Perris flooring projects finish fast: a typical 1,200–1,800 sq ft LVP or laminate installation takes 3–5 working days including old-floor removal and subfloor prep. Tile runs longer — roughly a week per major area — because of setting and grout cure times. We schedule around your household, and whole-home projects can be phased room by room.
Do you provide free flooring estimates in Perris?
Yes — every Perris flooring project starts with a free in-home estimate. We measure your rooms, check the subfloor, bring samples so you can see materials in your own light, and deliver a written price within 5 business days. No obligation and no pressure.
Does Construction Station install flooring in Perris?
Yes. Construction Station is a licensed California general contractor (CSLB #1108879) and has served Southern California homeowners since 2008. Perris is about 40 minutes southwest of our Yucaipa headquarters via the 60 and I-215, well inside our core Inland Empire service area — we're in the Perris Valley regularly. Every project gets the same in-house crew — no rotating subcontractors — and starts with a free in-home consultation.
What flooring handles Perris heat and dust best?
Porcelain tile and quality LVP. Both stay comfortable through 100°+ summers, neither traps the fine dust that blows through the Perris Valley, and both handle the humidity swings between evaporative cooling and AC. If you love the wood look, LVP with a 20-mil wear layer gives you it without hardwood's sensitivity to the dry heat.
Free Consultation

Start your Perris project. Pick a time.

Book a free in-home design consultation directly on our calendar — we come to you, anywhere in the Inland Empire. Prefer the phone? Call 909-797-6333.

Call NowFree Estimate →